Bafles
Satelitales Compactos
The R90HD is a high-class mini monitor. Unprecedented enclosure
rigidity and leading edge drive unit technology in the shape
of a 100mm (4”) MMP®II mid/bass driver and 25mm
(1”) C-CAM® gold dome tweeter combine to produce
clarity, dynamics and imaging abilities that are unparalleled
in a speaker of this size. It can fill a room with high fidelity
sound and yet visually melt into the background. The R90HD
can be installed easily on ceiling or wall using the same
high quality angled bracket supplied. Use the optional bespoke
RadiusHD stand for floor positions.
4" MMP®II. The Metal Matrix Polymer drivers have
been completely re-worked and re-modelled with the aid of
new design and simulation tools to achieve higher sensitivity
and increased magnetic linearity. The new shaped T-section
pole and focussed magnetic gap produces better linearity
and lower distortion, resulting in fast punchy bass. All
drivers are dedicated and model specific, with each model
in the Radius HD series being designed and voiced individually.
1" Gold C-CAM® tweeter providing extension to in
excess of 35 KHz ensuring the wide frequency bandwidth of
HD music and cinema formats can be replayed faithfully.
Magnetically shielded drivers allow Radius HD to be safely
used near sensitive microprocessor equipment or plasma/LCD
displays.
High quality crossover uses high-grade metalised Polypropylene
capacitors for increased clarity. High-grade air core and
laminated iron core inductors give lowest possible distortion
and low insertion losses.
Single through-bolt driver fixing provides mechanical de-coupling
and enhanced mid-band clarity and resolution. The through-bolts
also act as rigid cross bracing to give a very solid non-resonant
cabinet.
Internal PTC auto-reset protection circuit to prevent over-driving.
Specially developed high grade PCOFC internal cable is used
throughout to ensure maximum signal transfer at all frequencies
and low signal resistance.
Flush fitting grille with rotate-able ‘m’ logo
for positioning in Landscape or portrait orientation.
A specially designed die-cast metal wall bracket is supplied,
providing easy install and adjustment for wall positioning.
Especificaciones
Frequency Response:
80 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance:
8 Ohms
Power Handling Single (RMS):
60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W
Maximum SPL (dBA): 105
Bass Alignment: Bass reflex - rear ported
Drive Unit Complement: 1 x 100mm (4") MMP®II cone
mid-bass driver.
1 x 25mm (1") C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 198 x 125 x 140 mm
(7 13/16 x 4 15/16 x 5 1/2)
Weight (each):
Kg (lbs)
2 (4 3/8
